INTERCOOLER KITS TO SUIT:
- NISSAN
- SUBARU
- MITSUBISHI
- TOYOTA
- MAZDA
| CARP07-INTERCOOLER KIT-PULSAR GTiR RNN14(90-94) | ||||
| The quality and fitment of this kit is similar to much more expensive fmic's on the market like Greddy, Blitz, HKS and even APS. In most cases this front mount intercooler is larger and more efficient than the rest. For those who want a comparison for fitting, the ab88 kit is identicle to the Greddy kit. Key features and benifits: - Size: 600 x 300 x 76mm - Fully polished side tanks - Tabs on bottom and top for easy installation - Improved Tube and Fin to increase performance efficiency by 15% over the old bar and plate design - Intercooler inlet/outlet size: 2.5 inch O/D - Supports 650HP max - Fully polished alloy intercooler - Ultra low intercooler pressure drop: 0.5-1psi at 23psi (normal bar and plate intercooler is 2.8- 4 psi at 23 psi) - 35 % weight reduction compaired to bar and plate type intercooler - ABS and air conditioning do no not need to be relocated or removed - Only ~9KG in total weight for the full kit - Mikalor clamps included, absolutely NO jubilee clamps - Full installation kit is included in the price, including mounting brakets, silicone hoses, nuts, bolts, washers, pipework and intercooler - Everything in the picture is included | ||||
$380.00 (+ postage: $50.00) | ||||
| CARP013-INTERCOOLER KIT-S13 CA18DET (88-93) | ||||
| The quality and fitment of this kit is similar to much more expensive fmic's on the market like Greddy, Blitz, HKS and even APS. In most cases this front mount intercooler is larger and more efficient than the rest. For those who want a comparison for fitting, the ab88 kit is identicle to the Greddy kit. Key features and benifits: - Size: 600 x 300 x 76mm - Fully polished side tanks - Tabs on bottom and top for easy installation - Improved Tube and Fin to increase performance efficiency by 15% over the old bar and plate design - Intercooler inlet/outlet size: 2.5 inch O/D - Supports 650HP max - Fully polished alloy intercooler - Ultra low intercooler pressure drop: 0.5-1psi at 23psi (normal bar and plate intercooler is 2.8- 4 psi at 23 psi) - 35 % weight reduction compaired to bar and plate type intercooler - ABS and air conditioning do no not need to be relocated or removed - Only ~9KG in total weight for the full kit - Mikalor clamps included, absolutely NO jubilee clamps - Full installation kit is included in the price, including mounting brakets, silicone hoses, nuts, bolts, washers, pipework and intercooler - Everything in the picture is included | ||||
$380.00 (+ postage: $50.00) | ||||
| CARP09-INTERCOOLER KIT-S13 SR20DET (88-93) | ||||
| The quality and fitment of this kit is similar to much more expensive fmic's on the market like Greddy, Blitz, HKS and even APS. In most cases this front mount intercooler is larger and more efficient than the rest. For those who want a comparison for fitting, the ab88 kit is identicle to the Greddy kit. Key features and benifits: - Size: 600 x 280 x 76mm - Fully polished side tanks - Tabs on bottom and top for easy installation - Improved Tube and Fin to increase performance efficiency by 15% over the old bar and plate design - Intercooler inlet/outlet size: 2.5 inch O/D - Supports 650HP max - Fully polished alloy intercooler - Ultra low intercooler pressure drop: 0.5-1psi at 23psi (normal bar and plate intercooler is 2.8- 4 psi at 23 psi) - 35 % weight reduction compaired to bar and plate type intercooler - ABS and air conditioning do no not need to be relocated or removed - Only ~9KG in total weight for the full kit - Mikalor clamps included, absolutely NO jubilee clamps - Full installation kit is included in the price, including mounting brakets, silicone hoses, nuts, bolts, washers, pipework and intercooler - Everything in the picture is included | ||||
$380.00 (+ postage: $50.00) | ||||
| CARP010-INTERCOOLER KIT-S14/S15 SR20DET(94-02) |  | |||
| The quality and fitment of this kit is similar to much more expensive fmic's on the market like Greddy, Blitz, HKS and even APS. In most cases this front mount intercooler is larger and more efficient than the rest. For those who want a comparison for fitting, the ab88 kit is identicle to the Greddy kit. Key features and benifits: - Size: 600 x 300 x 76mm - Fully polished side tanks - Tabs on bottom and top for easy installation - Improved Tube and Fin to increase performance efficiency by 15% over the old bar and plate design - Intercooler inlet/outlet size: 2.5 inch O/D - Supports 650HP max - Fully polished alloy intercooler - Ultra low intercooler pressure drop: 0.5-1psi at 23psi (normal bar and plate intercooler is 2.8- 4 psi at 23 psi) - 35 % weight reduction compaired to bar and plate type intercooler - ABS and air conditioning do no not need to be relocated or removed - Only ~9KG in total weight for the full kit - Mikalor clamps included, absolutely NO jubilee clamps - Full installation kit is included in the price, including mounting brakets, silicone hoses, nuts, bolts, washers, pipework and intercooler - Everything in the picture is included | ||||
$380.00 (+ postage: $50.00) | ||||
| CARP08-INTERCOOLER KIT-R32/R33 GTST-R34 GTT(89-98) |  | |||
| The quality and fitment of this kit is similar to much more expensive fmic's on the market like Greddy, Blitz, HKS and even APS. In most cases this front mount intercooler is larger and more efficient than the rest. For those who want a comparison for fitting, the ab88 kit is identicle to the Greddy kit. Key features and benifits: - Size: 600 x 300 x 76mm - Fully polished side tanks - Tabs on bottom and top for easy installation - Improved Tube and Fin to increase performance efficiency by 15% over the old bar and plate design - Intercooler inlet/outlet size: 2.5 inch O/D - Supports 650HP max - Fully polished alloy intercooler - Ultra low intercooler pressure drop: 0.5-1psi at 23psi (normal bar and plate intercooler is 2.8- 4 psi at 23 psi) - 35 % weight reduction compaired to bar and plate type intercooler - ABS and air conditioning do no not need to be relocated or removed - Only ~9KG in total weight for the full kit - Mikalor clamps included, absolutely NO jubilee clamps - Full installation kit is included in the price, including mounting brakets, silicone hoses, nuts, bolts, washers, pipework and intercooler - Everything in the picture is included | ||||
$380.00 (+ postage: $50.00) | ||||
| CARP033A-INTERCOOLER KIT-SKYLINE R32 GTR(89-93) |  | |||
| The quality and fitment of this kit is similar to much more expensive fmic's on the market like Greddy, Blitz, HKS and even APS. In most cases this front mount intercooler is larger and more efficient than the rest. For those who want a comparison for fitting, the ab88 kit is identicle to the Greddy kit. Key features and benifits: - Size: 610 x 300 x 100mm - Fully polished side tanks - Tabs on bottom and top for easy installation - Improved Tube and Fin to increase performance efficiency by 15% over the old bar and plate design - Intercooler inlet/outlet size: 2.5 inch O/D - Supports 650HP max - Fully polished alloy intercooler - Ultra low intercooler pressure drop: 0.5-1psi at 23psi (normal bar and plate intercooler is 2.8- 4 psi at 23 psi) - 35 % weight reduction compaired to bar and plate type intercooler - ABS and air conditioning do no not need to be relocated or removed - Only ~9KG in total weight for the full kit - Mikalor clamps included, absolutely NO jubilee clamps - Full installation kit is included in the price, including mounting brakets, silicone hoses, nuts, bolts, washers, pipework and intercooler - Everything in the picture is included | ||||
$550.00 (+ postage: $50.00) | ||||
| CARP033B-INTERCOOLER KIT-SKYLINE R33/R34 GTR 96-02 | .JPG) | |||
| The quality and fitment of this kit is similar to much more expensive fmic's on the market like Greddy, Blitz, HKS and even APS. In most cases this front mount intercooler is larger and more efficient than the rest. For those who want a comparison for fitting, the ab88 kit is identicle to the Greddy kit. Key features and benifits: - Size: 610 x 300 x 100mm - Fully polished side tanks - Tabs on bottom and top for easy installation - Improved Tube and Fin to increase performance efficiency by 15% over the old bar and plate design - Intercooler inlet/outlet size: 2.5 inch O/D - Supports 650HP max - Fully polished alloy intercooler - Ultra low intercooler pressure drop: 0.5-1psi at 23psi (normal bar and plate intercooler is 2.8- 4 psi at 23 psi) - 35 % weight reduction compaired to bar and plate type intercooler - ABS and air conditioning do no not need to be relocated or removed - Only ~9KG in total weight for the full kit - Mikalor clamps included, absolutely NO jubilee clamps - Full installation kit is included in the price, including mounting brakets, silicone hoses, nuts, bolts, washers, pipework and intercooler - Everything in the picture is included | ||||
$550.00 (+ postage: $50.00) | ||||
| CARP034-INTERCOOLER KIT-Z32 300ZX-VG30DETT |  | |||
VG30DETT The quality and fitment of this kit is similar to much more expensive fmic's on the market like Greddy, Blitz, HKS and even APS. In most cases this front mount intercooler is larger and more efficient than the rest. For those who want a comparison for fitting, the ab88 kit is identicle to the Greddy kit. Key features and benifits: - Size: 515 x 210 x 70mm - Fully polished side tanks - Tabs on bottom and top for easy installation - Improved Tube and Fin to increase performance efficiency by 15% over the old bar and plate design - Intercooler inlet/outlet size: 2.5 inch O/D - Supports 650HP max - Fully polished alloy intercooler - Ultra low intercooler pressure drop: 0.5-1psi at 23psi (normal bar and plate intercooler is 2.8- 4 psi at 23 psi) - 35 % weight reduction compaired to bar and plate type intercooler - ABS and air conditioning do no not need to be relocated or removed - Only ~9KG in total weight for the full kit - Mikalor clamps included, absolutely NO jubilee clamps - Full installation kit is included in the price, including mounting brakets, silicone hoses, nuts, bolts, washers, pipework and intercooler - Everything in the picture is included | ||||
$500.00 (+ postage: $50.00) | ||||
| CARP044-INTERCOOLER KIT-EVO 1-2-3 (92-96) |  | |||
| The quality and fitment of this kit is similar to much more expensive fmic's on the market like Greddy, Blitz, HKS and even APS. In most cases this front mount intercooler is larger and more efficient than the rest. For those who want a comparison for fitting, the ab88 kit is identicle to the Greddy kit. Key features and benifits: - Size: 590 x 280 x 70mm - Fully polished side tanks - Tabs on bottom and top for easy installation - Improved Tube and Fin to increase performance efficiency by 15% over the old bar and plate design - Intercooler inlet/outlet size: 2.5 inch O/D - Supports 650HP max - Fully polished alloy intercooler - Ultra low intercooler pressure drop: 0.5-1psi at 23psi (normal bar and plate intercooler is 2.8- 4 psi at 23 psi) - 35 % weight reduction compaired to bar and plate type intercooler - ABS and air conditioning do no not need to be relocated or removed - Only ~9KG in total weight for the full kit - Mikalor clamps included, absolutely NO jubilee clamps - Full installation kit is included in the price, including mounting brakets, silicone hoses, nuts, bolts, washers, pipework and intercooler - Everything in the picture is included | ||||
$430.00 (+ postage: $50.00) | ||||
| CARP011-INTERCOOLER KIT-EVO 4-5-6 (96-01) |  | |||
| The quality and fitment of this kit is similar to much more expensive fmic's on the market like Greddy, Blitz, HKS and even APS. In most cases this front mount intercooler is larger and more efficient than the rest. For those who want a comparison for fitting, the ab88 kit is identicle to the Greddy kit. Key features and benifits: - Size: 600 x 300 x 76mm - Fully polished side tanks - Tabs on bottom and top for easy installation - Improved Tube and Fin to increase performance efficiency by 15% over the old bar and plate design - Intercooler inlet/outlet size: 2.5 inch O/D - Supports 650HP max - Fully polished alloy intercooler - Ultra low intercooler pressure drop: 0.5-1psi at 23psi (normal bar and plate intercooler is 2.8- 4 psi at 23 psi) - 35 % weight reduction compaired to bar and plate type intercooler - ABS and air conditioning do no not need to be relocated or removed - Only ~9KG in total weight for the full kit - Mikalor clamps included, absolutely NO jubilee clamps - Full installation kit is included in the price, including mounting brakets, silicone hoses, nuts, bolts, washers, pipework and intercooler - Everything in the picture is included | ||||
$380.00 (+ postage: $50.00) | ||||
| CARP012-INTERCOOLER KIT-EVO 7-8-9 (01-07) | ||||
| The quality and fitment of this kit is similar to much more expensive fmic's on the market like Greddy, Blitz, HKS and even APS. In most cases this front mount intercooler is larger and more efficient than the rest. For those who want a comparison for fitting, the ab88 kit is identicle to the Greddy kit. Key features and benifits: - Size: 600 x 260 x 70mm - Fully polished side tanks - Tabs on bottom and top for easy installation - Improved Tube and Fin to increase performance efficiency by 15% over the old bar and plate design - Intercooler inlet/outlet size: 2.5 inch O/D - Supports 650HP max - Fully polished alloy intercooler - Ultra low intercooler pressure drop: 0.5-1psi at 23psi (normal bar and plate intercooler is 2.8- 4 psi at 23 psi) - 35 % weight reduction compaired to bar and plate type intercooler - ABS and air conditioning do no not need to be relocated or removed - Only ~9KG in total weight for the full kit - Mikalor clamps included, absolutely NO jubilee clamps - Full installation kit is included in the price, including mounting brakets, silicone hoses, nuts, bolts, washers, pipework and intercooler - Everything in the picture is included | ||||
$380.00 (+ postage: $50.00) | ||||
| CARP12A -Deluxe Intecooler Kit -LEGNUM GALANT VR-4 |  | |||
Deluxe Intecololer Kit - Mitsubishi Galant VR-4 EC5W 6A13 (96-02) The quality and fitment of this kit is similar to much more expensive fmic's on the market like Greddy, Blitz, HKS and even APS. In most cases this front mount intercooler is larger and more efficient than the rest. For those who want a comparison for fitting, the ab88 kit is identicle to the Greddy kit. Key features and benifits: - Size: 600 x 240 x 96mm - Fully polished side tanks - Tabs on bottom and top for easy installation - Improved Tube and Fin to increase performance efficiency by 15% over the old bar and plate design - Intercooler inlet/outlet size: 2.5 inch O/D - Supports 650HP max - Fully polished alloy intercooler - Ultra low intercooler pressure drop: 0.5-1psi at 23psi (normal bar and plate intercooler is 2.8- 4 psi at 23 psi) - 35 % weight reduction compaired to bar and plate type intercooler - ABS and air conditioning do no not need to be relocated or removed - Only ~9KG in total weight for the full kit - Mikalor clamps included, absolutely NO jubilee clamps - Full installation kit is included in the price, including mounting brakets, silicone hoses, nuts, bolts, washers, pipework and intercooler - Everything in the picture is included | ||||
$430.00 (+ postage: $50.00) | ||||
| CARP028-INTERCOOLER KIT-SUPRA JZA80 2JZ-GTE(93-02) | ||||
| The quality and fitment of this kit is similar to much more expensive fmic's on the market like Greddy, Blitz, HKS and even APS. In most cases this front mount intercooler is larger and more efficient than the rest. For those who want a comparison for fitting, the ab88 kit is identicle to the Greddy kit. Key features and benifits: - Size: 600 x 300 x 76mm - Fully polished side tanks - Tabs on bottom and top for easy installation - Improved Tube and Fin to increase performance efficiency by 15% over the old bar and plate design - Intercooler inlet/outlet size: 2.5 inch O/D - Supports 650HP max - Fully polished alloy intercooler - Ultra low intercooler pressure drop: 0.5-1psi at 23psi (normal bar and plate intercooler is 2.8- 4 psi at 23 psi) - 35 % weight reduction compaired to bar and plate type intercooler - ABS and air conditioning do no not need to be relocated or removed - Only ~9KG in total weight for the full kit - Mikalor clamps included, absolutely NO jubilee clamps - Full installation kit is included in the price, including mounting brakets, silicone hoses, nuts, bolts, washers, pipework and intercooler - Everything in the picture is included | ||||
$380.00 (+ postage: $50.00) | ||||
| CARP035-INTERCOOLER KIT-SOARER JZZ30 1JZ-GTE 91-96 |  | |||
| The quality and fitment of this kit is similar to much more expensive fmic's on the market like Greddy, Blitz, HKS and even APS. In most cases this front mount intercooler is larger and more efficient than the rest. For those who want a comparison for fitting, the ab88 kit is identicle to the Greddy kit. Key features and benifits: - Size: 600 x 300 x 76mm - Fully polished side tanks - Tabs on bottom and top for easy installation - Improved Tube and Fin to increase performance efficiency by 15% over the old bar and plate design - Intercooler inlet/outlet size: 2.5 inch O/D - Supports 650HP max - Fully polished alloy intercooler - Ultra low intercooler pressure drop: 0.5-1psi at 23psi (normal bar and plate intercooler is 2.8- 4 psi at 23 psi) - 35 % weight reduction compaired to bar and plate type intercooler - ABS and air conditioning do no not need to be relocated or removed - Only ~9KG in total weight for the full kit - Mikalor clamps included, absolutely NO jubilee clamps - Full installation kit is included in the price, including mounting brakets, silicone hoses, nuts, bolts, washers, pipework and intercooler - Everything in the picture is included | ||||
$380.00 (+ postage: $50.00) | ||||
| CARP042-INTERCOOLER KIT-MARK II/CHASER JZX90/100 |  | |||
| The quality and fitment of this kit is similar to much more expensive fmic's on the market like Greddy, Blitz, HKS and even APS. In most cases this front mount intercooler is larger and more efficient than the rest. For those who want a comparison for fitting, the ab88 kit is identicle to the Greddy kit. Key features and benifits: - Size: 600 x 300 x 76mm - Fully polished side tanks - Tabs on bottom and top for easy installation - Improved Tube and Fin to increase performance efficiency by 15% over the old bar and plate design - Intercooler inlet/outlet size: 2.5 inch O/D - Supports 650HP max - Fully polished alloy intercooler - Ultra low intercooler pressure drop: 0.5-1psi at 23psi (normal bar and plate intercooler is 2.8- 4 psi at 23 psi) - 35 % weight reduction compaired to bar and plate type intercooler - ABS and air conditioning do no not need to be relocated or removed - Only ~9KG in total weight for the full kit - Mikalor clamps included, absolutely NO jubilee clamps - Full installation kit is included in the price, including mounting brakets, silicone hoses, nuts, bolts, washers, pipework and intercooler - Everything in the picture is included | ||||
$430.00 (+ postage: $50.00) | ||||
| CARP040-INTERCOOLER KIT- STARLET GLANZA EP91/EP82 |  | |||
Suits Totota Starlet EP82 GT (90-95) & EP91 GLANZA V (96-99) The quality and fitment of this kit is similar to much more expensive fmic's on the market like Greddy, Blitz, HKS and even APS. In most cases this front mount intercooler is larger and more efficient than the rest. For those who want a comparison for fitting, the ab88 kit is identicle to the Greddy kit. Key features and benifits: - Size: 600 x 260 x 70mm - Fully polished side tanks - Tabs on bottom and top for easy installation - Improved Tube and Fin to increase performance efficiency by 15% over the old bar and plate design - Intercooler inlet/outlet size: 2.5 inch O/D - Supports 650HP max - Fully polished alloy intercooler - Ultra low intercooler pressure drop: 0.5-1psi at 23psi (normal bar and plate intercooler is 2.8- 4 psi at 23 psi) - 35 % weight reduction compaired to bar and plate type intercooler - ABS and air conditioning do no not need to be relocated or removed - Only ~9KG in total weight for the full kit - Mikalor clamps included, absolutely NO jubilee clamps - Full installation kit is included in the price, including mounting brakets, silicone hoses, nuts, bolts, washers, pipework and intercooler - Everything in the picture is included | ||||
$430.00 (+ postage: $50.00) | ||||
| CARP039-INTERCOOLER KIT-RX7 FD3S 13B REW(92-02) | ||||
| The quality and fitment of this kit is similar to much more expensive fmic's on the market like Greddy, Blitz, HKS and even APS. In most cases this front mount intercooler is larger and more efficient than the rest. For those who want a comparison for fitting, the ab88 kit is identicle to the Greddy kit. Key features and benifits: - Size: 600 x 280 x 76mm - Fully polished side tanks - Tabs on bottom and top for easy installation - Improved Tube and Fin to increase performance efficiency by 15% over the old bar and plate design - Intercooler inlet/outlet size: 2.5 inch O/D - Supports 650HP max - Fully polished alloy intercooler - Ultra low intercooler pressure drop: 0.5-1psi at 23psi (normal bar and plate intercooler is 2.8- 4 psi at 23 psi) - 35 % weight reduction compaired to bar and plate type intercooler - ABS and air conditioning do no not need to be relocated or removed - Only ~9KG in total weight for the full kit - Mikalor clamps included, absolutely NO jubilee clamps - Full installation kit is included in the price, including mounting brakets, silicone hoses, nuts, bolts, washers, pipework and intercooler - Everything in the picture is included | ||||
$430.00 (+ postage: $50.00) | ||||
| CARP045-INTERCOOLER KIT-WRX IMPREZA GC8(92-96) |  | |||
| The quality and fitment of this kit is similar to much more expensive fmic's on the market like Greddy, Blitz, HKS and even APS. In most cases this front mount intercooler is larger and more efficient than the rest. For those who want a comparison for fitting, the ab88 kit is identicle to the Greddy kit. Key features and benifits: - Size: 590 x 250 x 70mm - Fully polished side tanks - Tabs on bottom and top for easy installation - Improved Tube and Fin to increase performance efficiency by 15% over the old bar and plate design - Intercooler inlet/outlet size: 2.5 inch O/D - Supports 650HP max - Fully polished alloy intercooler - Ultra low intercooler pressure drop: 0.5-1psi at 23psi (normal bar and plate intercooler is 2.8- 4 psi at 23 psi) - 35 % weight reduction compaired to bar and plate type intercooler - ABS and air conditioning do no not need to be relocated or removed - Only ~9KG in total weight for the full kit - Mikalor clamps included, absolutely NO jubilee clamps - Full installation kit is included in the price, including mounting brakets, silicone hoses, nuts, bolts, washers, pipework and intercooler - Everything in the picture is included | ||||
$430.00 (+ postage: $50.00) | ||||
| CARP06- INTERCOOLER KIT- WRX IMPREZA GC8(96-00) |  | |||
| The quality and fitment of this kit is similar to much more expensive fmic's on the market like Greddy, Blitz, HKS and even APS. In most cases this front mount intercooler is larger and more efficient than the rest. For those who want a comparison for fitting, the ab88 kit is identicle to the Greddy kit. Key features and benifits: - Size: 600 x 300 x 76mm - Fully polished side tanks - Tabs on bottom and top for easy installation - Improved Tube and Fin to increase performance efficiency by 15% over the old bar and plate design - Intercooler inlet/outlet size: 2.5 inch O/D - Supports 650HP max - Fully polished alloy intercooler - Ultra low intercooler pressure drop: 0.5-1psi at 23psi (normal bar and plate intercooler is 2.8- 4 psi at 23 psi) - 35 % weight reduction compaired to bar and plate type intercooler - ABS and air conditioning do no not need to be relocated or removed - Only ~9KG in total weight for the full kit - Mikalor clamps included, absolutely NO jubilee clamps - Full installation kit is included in the price, including mounting brakets, silicone hoses, nuts, bolts, washers, pipework and intercooler - Everything in the picture is included | ||||
$380.00 (+ postage: $50.00) | ||||
| CARP026-INTERCOOLER KIT-WRX IMPREZA GDA/GDB(00-05) | ||||
| The quality and fitment of this kit is similar to much more expensive fmic's on the market like Greddy, Blitz, HKS and even APS. In most cases this front mount intercooler is larger and more efficient than the rest. For those who want a comparison for fitting, the ab88 kit is identicle to the Greddy kit. Key features and benifits: - Size: 600 x 240 x 96mm - Fully polished side tanks - Tabs on bottom and top for easy installation - Improved Tube and Fin to increase performance efficiency by 15% over the old bar and plate design - Intercooler inlet/outlet size: 2.5 inch O/D - Supports 650HP max - Fully polished alloy intercooler - Ultra low intercooler pressure drop: 0.5-1psi at 23psi (normal bar and plate intercooler is 2.8- 4 psi at 23 psi) - 35 % weight reduction compaired to bar and plate type intercooler - ABS and air conditioning do no not need to be relocated or removed - Only ~9KG in total weight for the full kit - Mikalor clamps included, absolutely NO jubilee clamps - Full installation kit is included in the price, including mounting brakets, silicone hoses, nuts, bolts, washers, pipework and intercooler - Everything in the picture is included | ||||
$430.00 (+ postage: $50.00) | ||||
| CARP027- DELUXE KIT- WRX IMPREZA GDA/B(00-05) | .JPG) | |||
| The quality and fitment of this kit is similar to much more expensive fmic's on the market like Greddy, Blitz, HKS and even APS. In most cases this front mount intercooler is larger and more efficient than the rest. For those who want a comparison for fitting, the ab88 kit is identicle to the Greddy kit. Key features and benifits: - Size: 600 x 300 x 76mm - Fully polished side tanks - Tabs on bottom and top for easy installation - Improved Tube and Fin to increase performance efficiency by 15% over the old bar and plate design - Intercooler inlet/outlet size: 2.5 inch O/D - Supports 650HP max - Fully polished alloy intercooler - Ultra low intercooler pressure drop: 0.5-1psi at 23psi (normal bar and plate intercooler is 2.8- 4 psi at 23 psi) - 35 % weight reduction compaired to bar and plate type intercooler - ABS and air conditioning do no not need to be relocated or removed - Only ~9KG in total weight for the full kit - Mikalor clamps included, absolutely NO jubilee clamps - Full installation kit is included in the price, including mounting brakets, silicone hoses, nuts, bolts, washers, pipework and intercooler - Everything in the picture is included plus the following: | ||||
$500.00 (+ postage: $50.00) | ||||
